Figure 35. Primary Sas Expander; Table 24. 12X3.5" Single-Port Jbod 2000 Internal Components - Intel JBOD 2000 Hardware Manual

JBOD 2000 Internal Connection Overview
Label
A Front Panel
C HSBP Power Daisy Chain Cable
E 2x15-pin Front Panel Connector on PDB
G Expander Power Cable
I Four 2x4-pin HSBP Power Connectors on
PDB
K SMBus Connector on Expander
M External mini-SAS Cable (need to order
separately)
O Primary SAS Interface Board (SFF-8087 to
SFF-8088)
Q Expander Power Connector on Expander
S Primary SAS Expander
U Three mini-SAS Connectors on HSBP with
port number
The following diagram is used to help identify the mini-SAS connectors found on the SAS
expander cards. Take care when connecting the connectors from the SAS expander to the
connectors on the backplane because each connector is pre-programmed at the factory to
provide specific drive identification mapping. Improper connections may provide undesirable
drive mappings. By default, the Intel
mini-SAS cables connected.
40
Intel® Storage Server System JBOD 2000 Family Hardware Guide

Table 24. 12x3.5" Single-port JBOD 2000 Internal Components

Description
®
Storage Server System JBOD 2000 Family has all internal

Figure 35. Primary SAS Expander

Label
B Front Panel Cable
D Three 60mm System Fans
F 1x4-pin Expander Power Connector on PDB
H SMBus Connector on PDB
J 2x25-pin PSU Connector on PDB
L PSU
N SFF-8088 Connector on SAS Converter
0 Port Label: A PRI
1 Port Label: B PRI
P SFF-8087 Connector on SAS Converter
R SMBus Cable
T Fan Cable
V 12x 3.5" HSBP
Description
Revision 1.42