Table 26. 2U 24X2.5" Dual-Port Jbod2000 Components - Intel JBOD 2000 Hardware Manual

Intel® Storage Server System JBOD 2000 Family Hardware Guide
Label
A Front Panel
C HSBP Power Daisy Chain Cable
E 2x15-pin Front Panel Connector on PDB
G Expander Power Cable
I Four 2x4-pin HSBP Power Connectors on
PDB
K SMBus Connector on Primary and Second
Expander
M SFF-8087 Connector on Primary SAS
Converter
O SFF-8088 Connector on Primary SAS
Converter
Port 0 Label: A PRI
Port 1 Label: B PRI
Q SFF-8088 Connector on Second SAS
Converter
Port 0 Label: A SEC
Port 1 Label: B SEC
S SFF-8087 Connector on Second SAS
Converter
U Expander Power Connector on Primary and
Second Expander
W Primary SAS Expander
Y Fan Cable
AA Three 8x 2.5" Dual-port HSBPs
(each HSBP has four mini-SAS connectors)
The following diagram is used to help identify the mini-SAS connectors found on the SAS
expander cards. Take care when connecting the connectors from the SAS expander to the
connectors on the backplane because each connector is pre-programmed at the factory to
provide specific drive identification mapping. Improper connections may provide undesirable
drive mappings. By default, the Intel
SAS cables connected.
Revision 1.42

Table 26. 2U 24x2.5" Dual-port JBOD2000 Components

Description
®
Storage System JBOD 2000 Family has all internal mini-
JBOD 2000 Internal Connection Overview
Label
B Front Panel Cable
D Three 60mm System Fans
F 1x4-pin Expander Power Connector on PDB
H SMBus Connector on PDB
J 2x25-pin PSU Connector on PDB
L Two PSUs
N Primary SAS Interface Board (SFF-8087 to SFF-
8088)
P External mini-SAS Cable (need to order
separately)
R Second SAS Interface Board (SFF-8087 to SFF-
8088)
T Third SAS Interface Board (SFF-8087 to SFF-
8088)
Note: It is under the second SAS converter, so it
is not shown in the diagram. Its external SFF-
8088 connector label is Port 0: C PRI, Port 1: C
SEC.
V SMBus Cable
X Second SAS Expander
Z 12 mini-SAS Connectors on HSBP
Description
43