Product Family Overview
2.3.2
Front Panel Options
The Power Button toggles the system power on and off. Pressing this button sends a signal to
the integrated PDB board, which either powers on or powers off the system. The integrated LED
is a single-color (Green) indicator that supports different states as defined in the following table.
State
Power-off
Power-on
The System Status LED is a bi-color (Green/Amber) indicator that shows the current health of
the server system. The system provides two locations for this feature: one is located on the
Front Control Panel, and the other is located on the back edge of the server board, viewable
from the back of the system. Both LEDs are tied together and show the same state. The System
Status LED states are driven by the on-board platform management subsystem. The following
table provides a description of each supported LED state.
Color
State
Off
System is not
operating
Green
Solid on
8
Intel® Storage Server System JBOD 2000 Family Hardware Guide
Figure 7. Front Panel Options
Label
A
Power Button w/Integrated LED
B
System Status LED
Table 3. Power LED Functional States
Power Mode
LED
Non-ACPI
Off
Non-ACPI
On
Table 4. System Status LED State Definitions
Criticality
Not ready
The system is powered off (AC and/or DC).
Ok
Indicates that the system status is "healthy". The system is not
exhibiting any errors. AC power is present and the system is
either in a standby state or has been powered on.
Description
Description
System power is off.
System power is on.
Description
Revision 1.42