Related Manuals for Intel JBOD2000S3SP
Summary of Contents for Intel JBOD2000S3SP
- Page 1 ® Intel Storage System JBOD2312S3SP Service Guide A Guide for Technically Qualified Assemblers of Intel ® identified Subassemblies/ Products Revision 1.0 Apr 2017 Intel® Server Boards and Systems...
- Page 2 Intel® Storage Server System JBOD2000S3 Service Guide <This page is intentionally left blank.>...
- Page 3 Intel® Storage Server System JBOD2000S3 Service Guide Revision History Revision Date Modifications Number Apr 2017 First preliminary version Apr 2017 First public version...
- Page 4 This document contains information on products, services and/or processes in development. All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest TPS. The products and services described may contain defects or errors known as errata which may cause deviations from published specifications.
-
Page 5: Wichtige Sicherheitshinweise
Safety Information Important Safety Instructions Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Intel® Server Deployment Toolkit 3.0 CD and/or at http://www.intel.com/support/motherboards/server/sb/cs-010770.htm Wichtige Sicherheitshinweise Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor Sie eine der... -
Page 6: Warnings
Intel® Storage Server System JBOD2000S3 Service Guide Warnings Heed safety instructions: Before working with your product, whether you are using this guide or any other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and maintain compliance with existing product certifications and approvals. -
Page 7: Preface
JBOD 2000S3 System. For the latest revision of this manual, go http://www.intel.com/support Manual Organization Chapter 1 provides a brief overview of the Intel ® JBOD 2000S3 System. In this chapter, you will find a list of the server system features, and figures of the system and components to help you identify your system components and their locations. -
Page 8: Table Of Contents
Intel® Storage Server System JBOD2000S3 Service Guide Table of Contents Safety Information ..................................iii Important Safety Instructions ................................iii Wichtige Sicherheitshinweise ................................iii Consignes de sécurité ..................................iii Instrucciones de seguridad importantes ............................iii ...................................... iii 重要安全指导 Warnings ......................................iv Preface ...................................... - Page 9 Intel® Storage Server System JBOD2000S3 Service Guide Installing and Removing the SAS Expander ........................13 2.8.1 Removing the SAS Expander ............................13 2.8.2 Installing the SAS Expander ............................14 Installing and Removing the Power Distribution Board ....................15 2.9.1 Removing the Power Distribution Board ........................15 2.9.2...
- Page 10 Intel® Storage Server System JBOD2000S3 Service Guide List of Figures Figure 1. Intel ® Storage Server System JBOD2312S3SP ........................1 Figure 2. Intel JBOD2000S3 System Family Components ......................2 ® Figure 3. 12 x 3.5” Drive JBOD2312S3SP Front View ........................2 Figure 4.
- Page 11 Intel® Storage Server System JBOD2000S3 Service Guide List of Tables Table 1. Power Supply Output Capability ............................21 Table 2. System Environmental Limits Summary ..........................21...
-
Page 13: Jbod System Features
Storage Bay Options 12x – 3.5” SATA/SAS Hot Swap Hard Drive Bays Tool-less rack mount rail kit – Intel Product Code – AXXPRAIL Value rack mount rail kit – Intel Product Code – AXXVRAIL Cable Management Arm – Intel Product Code – AXX1U2UCMA (*supported with... -
Page 14: Jbod System Components
Intel® Storage Server System JBOD2000S3 Service Guide 1.2 JBOD System Components This section helps you identify the components of your server system. If you are near the system, you can also use the Quick Reference Label provided on the inside of the chassis cover to assist in identifying components. -
Page 15: Back Panel
Intel® Storage Server System JBOD2000S3 Service Guide Label Description System Status LED Figure 4. Front Panel Options 1.5 Back Panel Label Description SFF-8644 receptacle (label: External mini-SAS HD Port 0-3) SFF-8644 receptacle (label: External mini-SAS HD Port 4-7) Figure 5. JBOD2312S3SP Back View 1.6 Hard Disk Drive Carriers... -
Page 16: Bezel
Intel® Storage Server System JBOD2000S3 Service Guide 1.7 Bezel The front bezel is available as an optional accessory for the server system: Figure 6. Front view of Front Bezel 1.8 Hot-Swap SAS/SATA Backplane The Hot-Swap SAS/SATA backplane serves as an interface between the SAS expander(s) and the system drives. -
Page 17: Jbod2312S3Sp Interconnection
Intel® Storage Server System JBOD2000S3 Service Guide JBOD2312S3SP Interconnection The Intel ® Storage Server System JBOD2312S3SP has a 12x3.5” single-port HSBP, a primary SAS expander, a dual-port SAS interface board, a PDB, a PSU, and four fans in its chassis. -
Page 18: Hardware Installations And Upgrades
Intel® Storage Server System JBOD2000S3 Service Guide 2 Hardware Installations and Upgrades 2.1 Before You Begin Before working with your server product, pay close attention to the “ ” at the beginning of Safety Information this manual. NOTE: Whenever you service the system, you must first power down the server and unplug all peripheral devices and the power cord. -
Page 19: Removing And Installing The Front Bezel
Figure 12. Installing the Front Bezel Intel also provides an optional plastic badge for customer to use. To install the badge to the bezel, attach the badge onto the bezel until the hooks at the rear of the badge click into the bezel. -
Page 20: Removing And Installing The System Cover
Intel® Storage Server System JBOD2000S3 Service Guide Figure 13. Installing the Badge to the Front Bezel To remove the badge from the bezel, squeeze the hooks at the rear of the badge to release the badge (see letter “A”) and then remove the badge from the bezel (see letter “B”). -
Page 21: Installing The System Cover
Intel® Storage Server System JBOD2000S3 Service Guide Figure 15. Removing the System Cover 2.5.2 Installing the System Cover Place the system cover onto the chassis and slide forward to engage recessed edge at the front of the cover (see letter “A”). -
Page 22: Installing A Hard Disk Drive Into 3.5" Hard Drive Carrier
Intel® Storage Server System JBOD2000S3 Service Guide 2.6.1 Installing a Hard Disk Drive into 3.5” Hard Drive Carrier Remove the drive carrier by pressing the green button and opening the lever (see letter “A”). Slide the carrier out (see letter “B”). -
Page 23: Replacing The Power Supply
Intel® Storage Server System JBOD2000S3 Service Guide Figure 20. Installing Hard Disk Drive – Installing 2.5” HDD With the lever open, insert the hard disk drive assembly into the chassis (see letter “E”). Push in the lever to lock it into place (see letter “F”). -
Page 24: Figure 22. Removing The Power Supply Module
Intel® Storage Server System JBOD2000S3 Service Guide Figure 22. Removing the Power Supply Module If a filler panel is installed, use the 'finger hole' to remove the filler panel (see letter “B”). Figure 23. Removing the Filler Panel Do one of the following: Insert the power supply module into the power supply cage and push all the way until it clicks into place (see letter “C”). -
Page 25: Installing And Removing The Sas Expander
Intel® Storage Server System JBOD2000S3 Service Guide 2.8 Installing and Removing the SAS Expander 2.8.1 Removing the SAS Expander Disconnect all cables from the SAS Expander and remember the connection locations. Grasp the riser assembly with both hands and pull up to remove from the system. -
Page 26: Installing The Sas Expander
Intel® Storage Server System JBOD2000S3 Service Guide 2.8.2 Installing the SAS Expander Remove the PCI riser assembly from the system. Remove the filler panel from the add-in card slot and remove the fastener screw. Insert the SAS Expander till it is fully seated on the riser assembly as shown (see letter “A”). -
Page 27: Installing And Removing The Power Distribution Board
Intel® Storage Server System JBOD2000S3 Service Guide 2.9 Installing and Removing the Power Distribution Board 2.9.1 Removing the Power Distribution Board Disconnect the power cord, and unplug the PSU from the chassis. Disconnect all cables from the power distribution board and remember the connection locations. -
Page 28: Replacing A System Fan
Intel® Storage Server System JBOD2000S3 Service Guide 2.10 Replacing a System Fan Pull the system fan straight up to remove it from the fan holder. Replace the system fan. Figure 31. Replacing a System Fan 2.11 Replacing the Backplane 2.11.1 Replacing the 3.5”... -
Page 29: Figure 33. Removing 3.5" Hard Drive Backplane - Remove The Backplane
Intel® Storage Server System JBOD2000S3 Service Guide Figure 33. Removing 3.5” Hard Drive Backplane – Remove the Backplane 2.11.1.2 Installing the 3.5” Hard Drive Backplane Hold the backplane only by the edges. Do not push or pull on any components on the backplane. -
Page 30: Installing And Removing The Rack Handles
Intel® Storage Server System JBOD2000S3 Service Guide Intall the clip to the server chassis (see letter “F”). With the lever open, insert the hard disk drive assembly into the chassis (see letter “G”). Push in the lever to lock it into place (see letter “H”). Repeat step G and H to make sure all hard drive assemblies are in place. -
Page 31: Installing And Removing The Storage Front Panel
Intel® Storage Server System JBOD2000S3 Service Guide 2.13 Installing and Removing the Storage Front Panel 2.13.1 Installing the Storage Front Panel Align the interposer card with the two holes on the side wall of the server chassis (see letter “A”). -
Page 32: Figure 42. Removing The Interposer Card
Intel® Storage Server System JBOD2000S3 Service Guide Remove the two screws to release the storage front panel (see letter “D”). Remove the storage front panel from the side wall of the server chassis (see letter “E”). Figure 42. Removing the Interposer Card Connect the front panel control cable from the motherboard to the standard front control panel if needed. -
Page 33: Appendix A. Technical Reference
Non-palletized free fall in height 24 inches (≧40 lbs to < 80 lbs) Vibration, unpackaged 5 Hz to 500 Hz, 2.20 g RMS random +/-12 KV except I/O port +/- 8 KV per Intel Environmental test specification ® System Cooling Requirement 460 Watt Max –... -
Page 34: Appendix B. Regulatory And Compliance Information
Intel® Storage Server System JBOD2000S3 Service Guide Appendix B. Regulatory and Compliance Information Please refer to the Server Products Regulatory and Safety document for the product regulatory compliance reference. The document can be downloaded from http://www.intel.com/support/server... -
Page 35: Appendix C. Getting Help
— Server and chassis accessory parts list for ordering upgrades or spare parts — A searchable knowledgebase to search for product information throughout the support site If you are still unable to obtain a solution to your issue, send an email to Intel’s technical support center using the online form available at http://www.intel.com/support/feedback.htm?group=server... -
Page 36: Appendix D. Warranty Information
Intel® Storage Server System JBOD2000S3 Service Guide Appendix D. Warranty Information To obtain warranty information, visit the following Intel web site: http://www.intel.com/support/warranty...