Table of Contents
Advertisement
Chapter 4. Memory Settings (Utility/Card Mode)
The Compare Function
For the Patch Tone Copy and Patch Effect Copy
operations, you can use the Compare function.
The Compare function allows you to play the Patch
currently occupying the copy source. To play the Patch
of the copy source, press [UNDO/COMPARE] to access
the PATCH COMPARE display. The copy-source Patch
can be changed in this display as well, but it is not
possible to select patches from XP-A–E. After selecting
the copy source Patch, press [EXIT] to return to the
previous display.
fig.4-15.e
Copy source Patch (group, number, name)
* The Compare function cannot be used with Patch Tone
Copy if either TEMP or an XP-A–E patch is selected as
the copy source patch (Source).
* The Compare function cannot be used with Patch Effect
Copy if PERFORM is selected as the copy source (Source).
* Please be aware that when the Compare function is used to
play a Patch, it may sound slightly different than when it
is played normally.
Patch Name Copy
The name of a Patch will be copied to the current Patch.
fig.4-16.e
Copy source Patch (group, number, name)
118
Rhythm Set Copy
When you want to copy Rhythm Set settings to the current
Rhythm Set, press [UTIL/CARD] in Rhythm Set mode and
perform Copy operation.
Rhythm Key Copy
Individual key settings in a Rhythm Set will be copied to
each key in the current Rhythm Set.
fig.4-17.e
Copy source Rhythm Set
(group, number)
Copy source Key
* The copy source and copy destination Key parameters can also
be set by pressing a key on the keyboard.
* When the Copy operation is executed, an "*" will be displayed
in front of the copy-destination key.
The Compare Function
The Compare function can be used during the Rhythm
Key Copy operation.
The Compare function allows you to play the Rhythm
Set currently occupying the copy source. To play the
Rhythm Set of the copy source, press [UNDO/
COMPARE] to access the RHYTHM COMPARE
display. The copy-source Rhythm Set can be changed in
this display as well, but it is not possible to select
patches from XP-A–E. After selecting the copy source
Rhythm Set, press [EXIT] to return to the previous
display.
fig.4-18.e
Copy source Rhythm Set (group, number, name)
* If one of the XP-A–E Rhythm Sets is selected as the copy-
source Rhythm Set (Source), the Compare function is not
available.
* Please be aware that when the Compare function is used to
play a Rhythm Set, it may sound slightly different than
when it is played normally.
Rhythm Set Name Copy
The name of a Rhythm Set will be copied to the current
Rhythm Set.
fig.4-19.e
Copy source Rhythm Set (group, number, name)
Copy source
Rhythm Set name
Copy destination Key
Advertisement
Table of Contents
