Loop Region Settings - Roland V-Synth GT Owner's Manual

Loop Region Settings

When the loop switch (p. 180) is ON, you can specify the region that will be played back as a loop. The region of
the sample between Loop Start and Loop End will be played back repeatedly.
In the Sample Loop FWD screen that appears when you touch <Loop FWD>, specify the loop region for forward
playback. In the Sample Loop BWD screen that appears when you touch <Loop BWD>, specify the loop region for
backward playback.
fig.04-13_50
Immediately after sampling or loading a sample, Loop Start will be set to the beginning of the sample and Loop End
to the end of the sample.
If you set Loop Start and Loop End to locations within the sample, the sample will play back from the beginning, and
then the region between Loop Start and Loop End will play back repeatedly.
fig.04-14.e
Wave
Start
The data in the V-Synth GT is handled as 44.1 kHz data, which means there are 44,100 data samples per second.
The shortest possible loop that can be set is 16 data samples.
Loop range settings are ignored when the Playback Mode (p. 99) is set to "STEP" or "EVENT."
Loop Loop
Start End
Wave
End
Sample Mode
185