Vocal Designer - Roland V-Synth GT Owner's Manual

Vocal Designer

Vocal Designer
fig.06d-10-ps.eps
Parameter
Vocal Designer Switch
Mic
Level
Carrier
OSC1 (Oscillator 1 Switch)
OSC1 Waveform
(Oscillator 1 Waveform)
OSC1 Level (Oscillator 1 Level)
OSC2 (Oscillator 2 Switch)
OSC2 Waveform
(Oscillator 2 Waveform)
OSC2 Level (Oscillator 2 Level)
Vocoder
Level
Natural Voice
Effects
Chorus Send (Chorus Send Level)
Reverb Send (Reverb Send Level)
150
Value Description
OFF, ON Turns Vocal Designer on/off.
0–127 Indicates the mic input level.
Use the panel INPUT MIC LEVEL knob to adjust the level so that the peak in-
dication does not light.
OFF, ON Specifies whether the sound from OSC1 will be used as the carrier (ON) or
not (OFF).
– Selects the waveform that OSC1 will produce.
0–127 Specifies the level of OSC1.
OFF, ON Specifies whether the sound from OSC2 will be used as the carrier (ON) or
not (OFF).
– Selects the waveform that OSC2 will produce.
0–127 Specifies the level of OSC2.
0–127 Specifies the volume of Vocal Designer.
0–127 Specifies the volume of the mic input sound (your own voice).
0–127 Specifies the level of the signal sent to chorus.
0–127 Specifies the level of the signal sent to reverb.