Midi - Roland V-Synth GT Owner's Manual

System Mode (Settings Common to All Modes)

MIDI

fig.08-05.eps_50
Parameter
Device ID (Device ID Number)
Clock Source
Receive MIDI Ch
(Receive MIDI Channel)
Receive Sw
Program Change
(Receive Program Change Switch)
Bank Select
(Receive Bank Select Switch)
System Ex
(Receive System Exclusive Switch)
Transmit MIDI Ch
(Transmit MIDI Channel)
Program Change
(Transmit Program Change
Switch)
Bank Select
(Transmit Bank Select Switch)
Active Sens
(Transmit Active Sensing Switch)
Edit Data
(Transmit Edit Data Switch)
Clock Out
198
Value Description
17–32 When you want to transmit or receive System Exclusive messages, set this pa-
rameter to match the Device ID number of the other MIDI device.
INT The LFO frequency or Tone-FX change will synchronize to the patch tempo.
MIDI The LFO frequency or Tone-FX change will synchronize to the external MIDI
clock.
USB MIDI The LFO frequency or Tone-FX change will synchronize to the external USB
MIDI clock.
1–16 Specifies the MIDI receive channel.
OFF, ON Specifies whether MIDI messages will be received (ON) or not received
(OFF).
OFF, ON Specifies whether Program Change messages will be received (ON) or not
(OFF).
OFF, ON Specifies whether Bank Select messages will be received (ON) or not (OFF).
OFF, ON Specifies whether System Exclusive messages will be received (ON) or not
(OFF).
1–16, RX CH, Specifies the transmit channel of MIDI messages.
OFF If you do not want to transmit MIDI messages to external MIDI devices, turn
this parameter "OFF." If you want the transmit channel to always match the
Receive MIDI Channel, set this parameter to "RX CH."
OFF, ON Specifies whether Program Change messages will be transmitted (ON) or not
(OFF).
OFF, ON Specifies whether Bank Select messages will be transmitted (ON) or not
(OFF).
OFF, ON Specifies whether Active Sensing messages will be transmitted (ON) or not
(OFF).
OFF, ON Specify whether changes you make in the settings of a patch will be transmit-
ted as system exclusive messages (ON), or will not be transmitted (OFF).
OFF, ON Specifies whether MIDI clock will be transmitted (ON) or not (OFF).