Modify (When Phrase Model Is "Multifade") - Roland V-Synth GT Owner's Manual

Modify (when Phrase Model is "Multifade")

fig.06b-67-ps.eps_50
Parameter
Attack Time
Release Time
Porta Time (Portamento Time)
Sub Tone Level
Natural Feel
Vibrato Dly Time
(Vibrato Delay Time)
Vibrato Depth
Vibrato Rate
Value Description
-100– +100 Adjusts the attack of the sound. Positive (+) values will make the at-
tack slower, and negative (-) values will make the attack faster.
-100– +100 Adjusts the length of the release. Positive (+) values will lengthen the
release, and negative (-) values will shorten it.
-100– +100 Adjusts the speed of portamento. Positive (+) values will lengthen
the portamento time, and negative (-) values will shorten the porta-
mento time.
-100– +100 Adjusts the volume of the noise or sound that is heard in the back-
ground. Positive (+) values will increase the volume, and negative
(-) values will decrease it.
* This may not work for some selections of Source Waveform.
-100– +100 Adjusts the amount of variation in the sound. Positive (+) values will
produce more variation, and negative (-) values will produce less.
-100– +100 Adjusts the time from the beginning of the note until vibrato begins
to be applied. Positive (+) values will lengthen the time until vibrato
begins, and negative (-) values will shorten the time.
* This may not work for some selections of Source Waveform.
-100– +100 Adjusts the depth of vibrato when the dynamics are at the minimum.
Positive (+) values will produce deeper vibrato, and negative (-) val-
ues will produce less vibrato.
* This may not work for some selections of Source Waveform.
-100– +100 Adjusts the vibrato rate. Positive (+) values will make the vibrato
faster, and negative (-) values will make it slower.
Com Com OSC1/2 OSC1/2 MOD MOD COSM1/2 COSM1/2
Editing a Tone (Pro Edit)
TVA TVA AP Syn AP Syn Effects Effects
131