Roland V-Synth GT Owner's Manual page 145

Parameter
Track Button A–D
(Step Modulator Track Buttons A–
D)
Track TAB A–D
(Step Modulator Track Tabs A–D)
Loop (Step Modulator Loop Switch)
Grid (Step Grid)
End P (Step Modulator End Point)
Dir (Step Modulator Direction)
Zone (Step Modulator Zone)
Destination
(Step Modulator Destination)
STEP/SMOOTH
(Step/Smooth Switch)
Multi Step Modulator Menu
Value Description
OFF, ON These turn the multi step modulator on/off for the four tracks (A–D).
These access the editing screens for the four multi step modulator tracks (A–
D).
OFF, ON This turns looping on/off for the step sequence.
Note This specifies the note value of each step.
(Quarter note),
(Sixteenth note),
1–16 This specifies the sequence length as a number of steps.
FWD1–3, This specifies the direction in which the step sequence will play.
BWD1–3
FWD1
FWD2
FWD3
BWD1
BWD2
BWD3
1–16 This specifies the zone (p. 88) to which the step modulator will be applied.
The parameter that is controlled by the step sequence will depend on the
tone.
STEP, Touch < SMOOTH > to select a line graph (smooth change), or touch <STEP
SMOOTH > to select a bar graph (stepped change).
Reset Value Resets the step bar.
Invert Value Inverts the step bar in the vertical direction.
Reverse Value Inverts the step bar in the left/right direction.
Shift Value R Moves the step bar one step toward the right.
Shift Value L Moves the step bar one step toward the left.
(Eighth note), (Dotted eighth note),
(Dotted sixteenth note),
1 2 3 14 15 16
• • •
1 2 3 14 15 16
• • •
2 3 14 15
• • •
1 2 3 14 15 16
• • •
1 2 3 14 15 16
• • •
16 15 14 3 2 1
• • •
16 15 14 3 2 1
• • •
15 14 3 2
• • •
16 15 14 3 2 1
• • •
16 15 14 3 2 1
• • •
Editing a Tone (Pro Edit)
(Thirty-second note)
145