Roland V-Synth GT Owner's Manual page 56

Patch Mode (Editing a Patch)
Selecting a Tone
Once you've specified either the upper or lower tone, you can select the tone.
fig.05-02-j.eps
1.
Move the cursor to the tone number, either by pressing the cursor buttons, or by touching the tone number
indication.
2.
Select the desired tone number.
You can use any of the following methods to select a tone number.
• Turn the VALUE dial
• Press [INC/+] or [DEC/-]
• Drag your fingertip on the touch panel
• Use the numeric keys to directly enter a tone number (p. 34)
For example, if you want to select tone number 123, consecutively press numeric keys [1], [2], and [3], and
then press [ENTER] to confirm your selection.
56
Tone Number Tone Name
Search Button
Tone Category