Adjusting The Mic Settings - Roland JUPITER-Xm Owner's Manual

Adjusting the Mic Settings

Depending on the environment in which you're performing, noise
from the surroundings might be picked up by the mic, causing the
vocoder to not work as you intend.
In this case, adjust the microphone sensitivity so that it is less likely to
pickup noise.
1.
Press the [MENU] button.
2.
Use the [1] knob to select
[ENTER] button.
You can also make this selection by using the
instead of the [1] knob.
3.
Use the [1] knob to select a parameter, and use the
to edit the value.
For details on mic settings, refer to
4.
If you want to save the setting, execute the System Write
operation.
&
"Saving the System Settings (System Write)"
Preventing acoustic feedback
Acoustic feedback could be produced depending on the location of
microphones relative to built-in speakers (or the external speakers).
This can be remedied by:
5 Changing the orientation of the microphone(s).
5 Relocating microphone(s) at a greater distance from speakers.
5 Lowering volume levels.
"SYSTEM," and then press the
PAGE [ ] [ ] buttons
[2] knob
"MIC IN" (p. 20).
(p. 19)
Selecting and Playing Tones (MODEL BANK)
11