Roland V-Synth GT Owner's Manual page 23

20
KEY MODE
TONE [LOWER] If [SELECT] is unlit:
TONE [UPPER]
These switch the upper tone and lower tone
on/off. If both are off, there will be no sound.
If [SELECT] is lit:
These select the upper tone or lower tone.
You cannot select both simultaneously.
SELECT
Switches the function of the TONE LOWER/
UPPER buttons.
KEY RANGE Opens the Key Range screen, where you
can make settings for the keyboard (p. 68).
21
STRUCTURE
Here you can turn each sound-producing element (section)
on or off.
[1], [2], [3], [4], [5] Switches the structure type (the way in
which the sections are connected).
[AP-SYNTHESIS], These buttons switch the correspond-
[VOCAL DESIGN- ing section on/off.
ER],
[OSC1], [OSC2],
[MOD], [COSM1],
[COSM2], [TVA]
22
FX (EFFECTS)
Here you can switch the onboard effects (Tone effects,
chorus, reverb) on/off. When an effect is on, the indicator
for its button will light.
[TONE FX] Switches tone effects on and off.
[CHORUS]
Switches chorus on and off.
[REVERB] Switches reverb on and off.
23
AP-SYNTHESIS MODIFY knob
This lets you modify the sound of AP-Synthesis. You can
specify the parameter that will be modified (p. 124).
24
OSC1, OSC2
Here you can adjust the oscillator section.
These knobs are active if the oscillator is on (indicator lit).
The result of adjusting these knob will depend on the
oscillator type that is selected.
[PITCH] This modifies the pitch.
[TIME]/[PW] TIME
PW
FORMANT
[FORMANT]/[FAT]
FAT
25
COSM1, COSM2
Here you can adjust the COSM sections.
These knobs are active when COSM is on (indicator lit). The
result of adjusting these knobs will depend on the COSM
type that is selected.
[WIDTH]/[CUTOFF] WIDTH
CUTOFF
* If any other type is selected, this
[DETUNE]/[RESO] DETUNE
RESO
* If any other type is selected, this
26
ENV
Here you can adjust the TVA section (p. 35).
• When the ENV section's TVA indicator is on (lit)
[A] This modifies the Attack Time.
[D] This modifies the Decay Time.
[S] This modifies the Sustain Level.
[R]
This modifies the Release Time.
• When the ENV section's SCREEN indicator is on (lit)
The ADSR sliders shown in the display can be operated
directly.
Panel Descriptions
This modifies the
time.
This modifies the
pulse width.
This modifies the for-
mant.
Adjusts the fatness of
the sound when using
an analog oscillator.
Adjusts the width
when SBF (Side Band
Filter) is selected.
If a filter-type COSM
is selected, this ad-
justs the cutoff fre-
quency.
adjusts the parameter assigned to
the type.
Adjusts the detune
when SBF (Side Band
Filter) is selected.
If a filter-type COSM
is selected, this ad-
justs the resonance.
adjusts the parameter assigned to
the type.
23