Table of Contents
Advertisement
Panel Descriptions
6
Rear Panel
1.
LCD Out Connector
Connect the LCD cord of the music rest to this
connector (p. 17).
2.
USB (MIDI) Connector
Used for connecting a computer to the HPi-6 using a
USB cable (p. 99).
3.
MIDI Out/In connectors
An external MIDI device can be connected here to
receive performance data (p. 97).
*
There's also a MIDI In connector on the bottom panel of the unit.
You cannot use both MIDI In connectors at the same time. The HPi-6
will not function properly when two MIDI In connectors are used
simultaneously.
4.
Input jacks
These jacks can be connected to another sound
generating device or an audio device, so that the sound
of that device will be output from the HPi-6's speakers
(p. 96).
5.
Output jacks
These jacks can be connected to your audio system to
enjoy more powerful sound. They can also be connected
to a tape recorder or similar device in order to record
your performance on a cassette tape (p. 96).
HPi-6's Bottom Panel (Rear Side)
6.
Pedal jack
Connect the pedal cord of the stand to this jack (p. 17).
7.
AC Inlet
Connect the included power cord to this inlet (p. 17).
22
1
2
AC In
Music Rest
fig.MusicRestFront
fig.MusicRestRear
1.
2.
3
7
2
Display
This displays notations for the internal songs and
performances recorded to the HPi-6, in addition to a
variety of settings.
*
The explanations in this manual include illustrations that depict
what should typically be shown by the display. Note, however, that
your unit may incorporate a newer, enhanced version of the system
(e.g., includes newer sounds), so what you actually see in the display
may not always match what appears in the manual.
[Contrast] knob
This knob adjusts the contrast of the screen (p. 18).
4
Rear Panel
1
5
Advertisement
Table of Contents
