Table of Contents
Advertisement
Saving the Performance
Determining the Name of the Song to be Saved
8.
Press the
change, then press the
fig.RenameSong3-e
Song Name
Displays the name of the song to save.
Characters that can be input:
ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`
abcdefghijklmnopqrstuvwxyz{|}~
Space !"#$%&'()*+,-./0123456789:;<=>?@
Selecting the Save Number
9.
Press the
Destination>.
fig.RenameSong4-e
10.
Press the
number.
If a song name is displayed with a number, a song is already saved to that number.
If you select a number with a previously saved song and then proceed to save a new
song, the previously saved song will be erased. If you do not want to lose a saved
song, select a number with no song name indicated in the save-destination column.
Saving the Song
11.
Press the [
] button.
Saving begins. The time required for saving ranges from several seconds to half a
minute or more. Don't take the external memory out of the external memory
connector until the saving process is finished.
Press [
] button several times; the "File" screen returns to the display.
76
cursor left or right button to select the character you want to
cursor up or down button to change the character.
Character to be changed
The selected character is shown with
a black background.
cursor right button one or more times to select <Save
Save Destination
Displays the save-destination song
number.
If you select a song number that
displays a song name, and save a new
song, the previous song will be erased.
The selected setting turns orange.
cursor up or down button to select the save-destination
NOTE
Never turn off the power
while the saving operation is
in progress. Doing so will
damage the HPi-6's internal
memory or external memory,
making it unusable.
It's a good idea to get into the
habit of moving the write-
protect tab (p. 10) on the
floppy disk to the "Protect"
position when you've finished
saving your data. Keeping the
tab at "Protect" prevents
operations that could erase
your songs by mistake.
Advertisement
Table of Contents
