Saving The Performance; Using External Memory; Connecting An External Memory; Rotating The External Memory Connector Holder - Roland HPi-6 Owner's Manual

Saving the Performance

Using External Memory

If you install external memory or a floppy disk drive (optional; sold separately), you'll be able to save songs
you've recorded and listen to commercially available music files.

■ Connecting an External Memory

1.
Connect the external memory to the External Memory connector.
fig.ConnectUSB1-e

■ Rotating the External Memory Connector Holder

The External Memory connector holder rotates 90 degrees left and right.
Rotating the External Memory connector holder allows you to avoid damaging the
connected external memory if something happens to bump against it.
1.
Grasp the External Memory connector holder and turn it 90 degrees to
the left or right.
fig.ConnectUSB2-2-e
72
90 degrees 90 degrees
to the left to the right
External Memory
Connector
External Memory
Connector Holder
If connecting an optional
floppy disk drive, substitute
"floppy disk" wherever the
term "external memory"
appears here.
NOTE
Use external memory and
floppy disk drive available
from Roland. Proper
functioning cannot be
guaranteed if other external
memory products are used.
If connecting an optional
floppy disk drive, refer to
"Attaching the Floppy Disk
Drive" (p. 113).
NOTE
Be sure to grasp the External
Memory connector holder
itself when rotating it. Never
rotate the External Memory
connector holder by holding
the connected external
memory.
NOTE
Take care not to allow your
fingers to become pinched
when rotating the External
Memory connector holder.