Assigning A Marker In The Middle Of A Measure (Resolution) - Roland HPi-6 Owner's Manual

Moving an Assigned Marker
After adding markers to a song, you can then move to the location where Marker A
is set by holding down the
[ (Bwd)] or [
To adjust the location of marker B, hold down the
the [ (Bwd)] or [
Moving to the Location of an Assigned Marker
After assigning a marker in the song, press either
move (jump) to the location of the marker.
Playing Repeatedly between Markers
After assigning both markers A and B, press the
<Repeat> to "On."
When you press the [
markers.
Deleting a Marker You've Assigned
Hold down the [
A, or press the
■ Assigning a Marker in the Middle of a Measure
(Resolution)
A marker can be assigned in the middle (at the beginning of a beat) of a measure.
1.
Press the [Count/Marker] button to display the "Count" screen, then press
the [ ] button.
2.
Press the [ ] button once more to access the "Resolution" screen.
fig.d-MarkerReso-e_50
3.
Press the
Item
Resolution
cursor left button and pressing either the
(Fwd)] button.
(Fwd) button.
(Play/Stop)] button, playback will repeat between the
] button, and press the
cursor right button to delete marker B.
cursor up or down button to change the setting.
Setting
Markers will be assigned to the beginning of a
Measure
measure.
Markers will be assigned to the beginning of a beat.
→ If you want to assign a marker to the beginning of a
Beat
beat, assign the marker while playing back the song.
cursor right button and press
cursor left or right button to
cursor down button to turn
cursor left button to delete marker
Practicing
If you use Repeat Playback
without assigning marker A or
B
The entire selected song will be
played back repeatedly.
If you use Repeat Playback
when only marker A is
assigned
The song will play back
repeatedly from marker A to the
end of the song.
If you use Repeat Playback
when only marker B is
assigned
The song will play back
repeated from the beginning of
the song to marker B.
If <Repeat> in the "Marker"
screen is turned "On," you can
press the [ (Notation)]
button to display the Notation
screen and play back
repeatedly. Anything you
want to do that involves
markers, including moving to
a particular marker, is
accomplished within the
"Marker" screen.
61