Before You Play; Attaching The Music Rest - Roland FP-10 ACR Owner's Manual

Before You Play

Placing the FP-10-ACR on a Stand
If you want to place the FP-10-ACR on a stand, use the Roland KSCFP10 (refer to the KSCFP10 Owner's Manual), KS-12, KS-20X, or KS-10Z.
Be careful not to pinch your fingers when setting up the stand.
KS-12
Adjust the height of the stand to the lowest position.
Adjust the width of the stand so
that the rubber feet on the front of
the piano fit into the corresponding
openings of the stand
Keyboard side
Top view
KS-10Z
Align the front of the Piano
with the front of the stand
Note when placing the FP-10-ACR on a stand
Be sure to follow the instructions in the Owner's Manual carefully when placing this unit on a stand.
If it is not set up properly, you risk creating an unstable situation which could lead to the unit falling or the stand toppling,
and may result in injury.
Beware of overturning!
To prevent the FP-10-ACR from overturning, do not apply excessive force to it, and never sit or stand on it.

Attaching the Music Rest

2
NOTE
For safety, do not use the stand
in its very highest adjustment
position.
Insert the music rest into the slit on the top of the FP-10-ACR.
KS-20X
Align the center of the Piano with the center of the stand.
Adjust the position of the
arm sleeves so the piano
rests on top of them
Align the front of the Piano
with the front of the stand
Adjust the stand so that its width is not less than 700 mm (27-9/16 inch).
Adjust the horizontal width
Place the Piano so that its rubber feet on
the front of the piano are on the inner side
of the stand
Keyboard side
Top view