Table of Contents
Advertisement
Adding Variety to Your Performances
Applying Effects to the Sound
■ Adding Reverberation to the Sound (Reverb)
By applying the reverb effect you can produce a pleasant reverberation, making it
sound as though you were performing in a concert hall.
fig.d-Effect2-e
1.
Press the [Reverb] button.
The button's indicator will light, and a reverb effect will be applied to the sound.
To cancel the reverb effect, press the [Reverb] button, getting its indicator to go dark.
■ Adding Richness to the Sound (Chorus)
By applying the chorus effect you can make the sound richer and more spacious.
You can turn the chorus effect on and off for each tone individually.
1.
Press the [Menu/Lesson] button.
The Menu screen appears.
2.
Press the
button.
3.
Press the
button.
4.
Press the
fig.d-Effect2-e
48
cursor button to select <Functions>, then press the [
cursor button to select <Effect>, then press the [
cursor right button to select <Chorus>.
NOTE
It is not possible to memorize
the reverb effect setting for
each tone.
The depth of the reverb effect
can be adjusted. Refer to
"Adjusting the Depth of the
Effects (Effect)" (p. 81).
You can change the amount of
reverb applied by holding
down the [Reverb] button and
pressing the
or down button.
]
]
cursor up
Advertisement
Table of Contents
