PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may
have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.
M4 x 19mm
M4 x 16mm
Screw (45)
Patch Screw (26)
M10 Nylon
M10 Split
Locknut (32)
Washer (38)
M10 x 55mm Patch Screw (20)
M10 x 20mm
M10 x 35mm Screw (34)
Patch Screw (28)
M10 x 62mm Patch Screw (37)
M10 x 68mm Bolt (44)
M10 x 114mm Bolt (33)
6