ProForm ACTIVATOR V5 User Manual page 11

11. Tip: Be careful not to pinch the wires during
this step.
Attach the front of the Console (3) to the back
of the Console with the four M4 x 12mm Self-
tapping Screws (27) you removed in step 8 and
an M4 x 19mm Screw (45).
See step 9. Tighten the two M4 x 16mm
Patch Screws (26).
12. Plug the Power Cord (17) into the Receptacle
(18) located on the Base (5).
13. Make sure that all parts are properly tightened before you use the vibration platform.
11
3
12
17
11
3
27
27
45
5
18