Switching The Ac 41 On And Off - Sennheiser EK IEM G4 Instruction Manual

Switching the AC 41 on and off

To switch on the antenna combiner:
▷ Short-press the ON/OFF button.
The antenna combiner switches on and the power LED turns green.
The transmitters receive the RF signal. The status LEDs light up (see
"Meaning of the LEDs").
To switch the antenna combiner to
▷ Hold down the ON/OFF button until the power LED turns off.
To fully switch off the antenna combiner:
Disconnect the antenna combiner from the power supply system by un-
▷
plugging the power supply unit from the wall socket.
Using the AC 41
standby mode:
95