Installing the EK IEM G4
These sections contain detailed information about installing and starting
up the EK IEM G4.
You can find information about operating the EK IEM G4 under "Using the
EK IEM G4".
Inserting and removing the batteries/rechargeable
batteries
You can operate the diversity receiver either with batteries (AA, 1.5 V) or
with the rechargeable Sennheiser BA 2015 battery.
▷
Press the two catches and open the battery compartment cover.
Insert the batteries or the rechargeable battery as shown below. Please
▷
observe correct polarity when inserting the batteries.
Close the battery compartment.
▷
The cover locks into place with an audible click.
Installing the EK IEM G4
15