Deactivating The Rf Signal (Rf Mute) - Sennheiser EK IEM G4 Instruction Manual

Deactivating the RF signal (RF mute)

To deactivate the RF signal:
Press the STANDBY button.
▷
RF Mute Off? appears in the display panel.
Turn the jog dial.
▷
RF Mute ON? appears in the display panel.
▷ Press the jog dial.
The transmission frequency is displayed, however the transmitter is
not transmitting an RF signal. The
plays on the SR IEM G4 display panel") and the LED warnings are illu-
minated (see "Operating elements of the SR IEM G4 transmitter").
To activate the RF signal:
Press the STANDBY button.
▷
RF Mute Off? appears in the display panel.
Turn the jog dial.
▷
RF Mute ON? appears in the display panel.
Press the jog dial.
▷
The warning in the display and the LED warnings go out.
Using the SR IEM G4
RF Mute warning appears (see "Dis-
75