Connecting Earphones To The Ek Iem G4 - Sennheiser EK IEM G4 Instruction Manual

Connecting earphones to the EK IEM G4

ATTENTION
Danger due to high volume levels
Volume levels that are too high may damage your hearing.
Turn down the volume of the headphone output before you put on the
▷
headphone.
To connect the earphones to the receiver:
Insert the cable's 3.5 mm jack plug into the PHONES socket on the re-
▷
ceiver as shown in the diagram.
►
The ground connection of the earphone cable acts as an antenna for
the second diversity branch. For details on the pin assignment, see
"Pin assignment".
Installing the EK IEM G4
17