Switching the EM 100 G4 on and off
To switch the receiver on:
▷
Short-press the STANDBY button.
The receiver switches on and the Receiver Parameters standard dis-
play appears.
►
To switch the receiver to
▷
If necessary, deactivate the lock-off function (see "Lock-off function").
Press and hold the STANDBY button until
▷
panel.
The display panel switches off.
To
completely switch
the receiver off:
▷
Disconnect the receiver from the power supply system by unplugging
the power supply unit from the wall socket.
standby
mode:
OFF
Using the EM 100 G4
appears on the display
52