Using The Xs Wireless Syst Ems; Switching T He Receiver On/ Off; Switching The Transmitters On/ Off - Sennheiser XS Wireless Series Instruction Manual

Using the XS WIRELESS systems
Using t he XS WIRELESS syst ems
Swit ching t he receiver on/ off
To switch t he receiver on:
Press the standby button
E
C heck the RF signal level " RF"
E
– The RF signal level is not displayed: The receiver frequency is unused. You can put
your transmitter into operation.
– The RF signal level is displayed: The receiver frequency is already used. Read the
chapter " Selecting and changing a receiver channel" .
To switch t he receiver to standby
Keep the standby button
E
To completely switch t he receiver off:
Disconnect the receiver from the mains by unplugging the mains unit from the wall
E
socket.
Swit ching t he t ransmit t ers on/ off
To switch t he transmitters on:
Press the ON/ OFF button
E
receiver and the transmitters displays the charge status of the batteries:
Display on t he receiver Display on t he transmit t er
To switch t he transmitters off:
Keep t he ON/ OFF button
E
615.
375
1 . The receiver switches on, the display panel is backlit.
H
on the receiver's display panel.
mode:
1 pressed until " OFF" appears on the display panel.
. The powerLED lights up red. The display panel of the
C harge st at us
approx. 100 %
approx. 70 %
approx. 30 %
The display and the power
LED are flashing.
The charge status is critical.
pressed until " OFF" appears on t he display panel.
OFF
XS WIRELESS | 9