Connecting/Disconnecting The Em 100 G4 To/From The Power Supply System - Sennheiser ew 100 G4 series Instruction Manual

Connecting/disconnecting the EM 100 G4 to/from
the power supply system
Only use the supplied power supply unit. It is designed for your receiver
and ensures safe operation.
To connect the EM 100 G4 to the power supply system:
Insert the plug of the power supply unit into the DC IN socket of the re-
▷
ceiver.
Pass the cable of the power supply unit through the cable grip.
▷
▷ Slide the supplied country adapter onto the power supply unit.
Plug the power supply unit into the wall socket.
▷
To completely disconnect the EM 100 G4 from the power supply system:
▷ Unplug the power supply unit from the wall socket.
Unplug the power supply unit from the DC IN socket of the receiver.
▷
Installing the EM 100 G4
21