Carriage Will Not Raise, But Winch Will Operate - Genie Superlift SL-5 Parts & Service Manual

Parts and Service Manual - First Edition
Carriage Will
Not Raise,
But Winch
Will Operate
Part No. 32283
yes
Check for broken cable.
no
Check all cable pulleys incorrect Inspect the cable for
to verify that the cable
is properly routed.
correct
bad
Inspect winch drum and
pinion gear for damage.
good
Contact Genie
Industries Service
Department.
Genie Superlift
Section 5 - Troubleshooting Flow Charts
Replace broken cable.
See Repair procedure
2-2, How to Replace the
Lifting Cable.
bad
kinks, frays and
damage.
good
bad
Check pulley and pulley
guard for damage.
good
Re-install cable
(if removed during
inspection).
Replace damaged
components OR contact
Genie Industries
Service Department.
Chart 2
Replace damaged
cable. See Repair
procedure 2-2, How to
Replace the Lifting
Cable. Then check
pulley and guard for
damage and replace if
needed.
Replace damaged
component.
5 - 3