Finding Feature Information - Cisco Catalyst 2960-X Security Configuration Manual

Configuring Port-Based Traffic Control
Command or Action
Step 5 end
Example:
Switch(config)# end
Step 6 show port-security [interface interface-id]
[address]
Example:
Switch# show port-security interface
gigabitethernet1/0/1
Step 7
show running-config
Example:
Switch# show running-config
Step 8 copy running-config startup-config
Example:
Switch# copy running-config startup-config
Related Topics
Port Security Aging, on page 408

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
OL-29048-01
Purpose
• inactivity—Sets the aging type as inactivity aging. The secure
addresses on this port age out only if there is no data traffic
from the secure source addresses for the specified time period.
Returns to privileged EXEC mode.
Verifies your entries.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
Finding Feature Information
417