Cisco Catalyst 2960-X Security Configuration Manual page 98

Vendor-Specific RADIUS Attributes
Number
26
26
26
26
26
26
26
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
74
Vendor-Specific Sub-Type Number
Company Code
9 1
9 1
9 1
9 1
9 1
9 1
9 1
Attribute Description
l2tp-cm-local-window-size Specifies the maximum
receive window size for
L2TP control messages.
This value is advertised to
the peer during tunnel
establishment.
l2tp-drop-out-of-order Respects sequence
numbers on data packets
by dropping those that are
received out of order. This
does not ensure that
sequence numbers will be
sent on data packets, just
how to handle them if they
are received.
l2tp-hello-interval Specifies the number of
seconds for the hello
keepalive interval. Hello
packets are sent when no
data has been sent on a
tunnel for the number of
seconds configured here.
l2tp-hidden-avp When enabled, sensitive
AVPs in L2TP control
messages are scrambled or
hidden.
l2tp-nosession-timeout Specifies the number of
seconds that a tunnel will
stay active with no
sessions before timing out
and shutting down.
tunnel-tos-reflect Copies the IP ToS field
from the IP header of each
payload packet to the IP
header of the tunnel packet
for packets entering the
tunnel at the LNS.
l2tp-tunnel-authen If this attribute is set, it
performs L2TP tunnel
authentication.
Configuring RADIUS
OL-29048-01