Configuring 802.1X Authentication With Downloadable Acls And Redirect Urls; Configuring Downloadable Acls - Cisco Catalyst 2960-X Security Configuration Manual

Cisco ios release 15.0(2)ex
Hide thumbs Also See for Catalyst 2960-X:
Table of Contents

Advertisement

Configuring IEEE 802.1x Port-Based Authentication
Command or Action
Step 13
show running-config interface interface-id
Example:
Switch# show running-config interface
gigabitethernet1/0/1
Step 14
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 15
Configuring NEAT with Auto Smartports Macros

Configuring 802.1x Authentication with Downloadable ACLs and Redirect URLs

In addition to configuring 802.1x authentication on the switch, you need to configure the ACS. For more
information, see the Configuration Guide for Cisco Secure ACS 4.2:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/configuration/guide/acs_config.pdf
You must configure a downloadable ACL on the ACS before downloading it to the switch.
Note
After authentication on the port, you can use the show ip access-list privileged EXEC command to display
the downloaded ACLs on the port.

Configuring Downloadable ACLs

The policies take effect after client authentication and the client IP address addition to the IP device tracking
table. The switch then applies the downloadable ACL to the port.
Beginning in privileged EXEC mode:
OL-29048-01
Configuring 802.1x Authentication with Downloadable ACLs and Redirect URLs
Purpose
Verifies your configuration.
(Optional) Saves your entries in the configuration file.
You can also use an Auto Smartports user-defined macro
instead of the switch VSA to configure the authenticator
switch. For more information, see the Auto Smartports
Configuration Guide for this release.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
345

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents