Access List Numbers - Cisco Catalyst 2960-X Security Configuration Manual

Standard and Extended IPv4 ACLs

Access List Numbers

The number you use to denote your ACL shows the type of access list that you are creating.
This lists the access-list number and corresponding access list type and shows whether or not they are supported
in the switch. The switch supports IPv4 standard and extended access lists, numbers 1 to 199 and 1300 to
2699.
Table 17: Access List Numbers
Access List Number
1–99
100–199
200–299
300–399
400–499
500–599
600–699
700–799
800–899
900–999
1000–1099
1100–1199
1200–1299
1300–1999
2000–2699
In addition to numbered standard and extended ACLs, you can also create standard and extended named IP
ACLs by using the supported numbers. That is, the name of a standard IP ACL can be 1 to 99; the name of
an extended IP ACL can be 100 to 199. The advantage of using named ACLs instead of numbered lists is that
you can delete individual entries from a named list.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
148
Type
IP standard access list
IP extended access list
Protocol type-code access list
DECnet access list
XNS standard access list
XNS extended access list
AppleTalk access list
48-bit MAC address access list
IPX standard access list
IPX extended access list
IPX SAP access list
Extended 48-bit MAC address access list
IPX summary address access list
IP standard access list (expanded range)
IP extended access list (expanded range)
Configuring IPv4 ACLs
Supported
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
OL-29048-01