Configuring A Web-Based Authentication Local Banner - Cisco Catalyst 2960-X Security Configuration Manual

Configuring a Web-Based Authentication Local Banner

DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2
configure terminal
Example:
Switch# configure terminal
Step 3 ip admission max-login-attempts number
Example:
Switch(config)# ip admission max-login-attempts
10
Step 4 end
Example:
Switch(config)# end
Step 5
show running-config
Example:
Switch# show running-config
Step 6
copy running-config startup-config
Example:
Switch# copy running-config startup-config
Configuring a Web-Based Authentication Local Banner
Follow these steps to configure a local banner on a switch that has web authentication configured.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
382
Configuring Web-Based Authentication
Purpose
Enables privileged EXEC mode. Enter your password
if prompted.
Enters the global configuration mode.
Sets the maximum number of failed login attempts. The
range is 1 to 2147483647 attempts. The default is 5.
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
OL-29048-01