Note
Firewall rules entered for HTTPS and SSH access also apply for CSD access. The
source IP address ("From IP") for CSD access is defined as 10.99.99.2.
New
Adds a new approved call number for CSD remote access that you can then fill out.
Delete
Removes a firewall rule for CSD remote access.
Factory setting
The factory settings for the SINAUT MD741-1 are as follows:
Enable CSD dial-in
PPP username
PPP password
Approved Call Numbers
SINAUT MD741-1
C79000- G8976-C212
No (switched off)
service
service
*
Remote access
97