Siemens SINAUT MD741-1 System Manual page 52

External interface
Warning
Sending ping packets (ICMPs) increases the amount of data sent and received via
EGPRS or GPRS. This can lead to increased costs.
Figure 5-4
Enable connection check
Yes activates the function.
Ping Targets – Hostname
Select up to four remote stations that the SINAUT MD741-1 can ping. The remote
stations must be available continuously and must answer pings.
Note
Make sure that the selected remote stations will not be disturbed.
Connection check interval (minutes)
Specifies the interval at which the connection check ping packets are sent by the
SINAUT MD741-1. This is specified in minutes.
52
External Network > Connection Check
SINAUT MD741-1
C79000- G8976-C212