Siemens SINAUT MD741-1 System Manual page 63

Destination port
Specify here the port number (e.g. 80) at which the data packets which are to be
forwarded arrive from the external network.
Forward to IP
Specify here the IP address in the local network to which the incoming data
packets should be forwarded.
Forward to port
Specify here the port number (e.g.) for the IP address in the local network to which
the incoming data packets should be forwarded.
Log
For each port forwarding rule you can define whether the event should be
logged when the rule takes effect - set Log to Yes
●
or not - set Log to No (factory setting)
●
The log is kept in the firewall log, see Chapter 6.4.
Factory setting
The factory settings for the SINAUT MD741-1 are as follows:
Forwarding Rules
Protocol
Destination port
Forward to IP
Forward to port
Log
SINAUT MD741-1
C79000- G8976-C212
Security functions
-
All
80
127.0.0.1
80
No (switched off)
63