Siemens SINAUT MD741-1 System Manual page 26

Configuration
Calling up the start page of the SINAUT MD741-1
3. In the address line of the browser, enter the address of the SINAUT MD741-1
in full. In the factory settings this is:
https://192.168.1.1
Result: A security message appears. In Internet Explorer 7, for example, this
one:
Figure 3-2
4. Acknowledge the corresponding safety message with "Continue loading this
page ..."
Note
Because the device can only be administered via encrypted access, it is delivered
with a self-signed certificate. In the case of certificates with signatures that the
operating system does not know, a security message is generated. You can
display the certificate.
It must be clear from the certificate that it was issued for SIEMENS AG. The Web
user interface is addressed via an IP address and not using a name, which is why
the name specified in the security certificate, is not the same as the one in the
certificate.
Entering the user name and password
5. You will be asked to enter the user name and the password:
26
Confirming the security message
SINAUT MD741-1
C79000- G8976-C212