VPN connection
For authentication with pre-shared secret key (PSK):
In Roadwarrior Mode the Remote ID must be entered manually. The Remote
●
ID must have the format of a hostname (e.g. RemoteStation.de) or the format
of an e-mail address (remote@station.de), and must be the same as the Local
ID of the remote station.
The Local ID can be left on NONE. In this case the IP address is used as the
local IP address. If you enter a Local ID; then it must have the format of a
hostname (e.g. RemoteStation.de) or the format of an e-mail address
(remote@station.de), and must be the same as the Local ID of the remote
station.
Roadwarrior Mode Edit IKE
Here you can define the properties of the VPN connection according to your
requirements and what you have agreed with the system administrator of the
remote station.
Figure 7-5
72
IPsec VPN > IKE bearbeiten
SINAUT MD741-1
C79000- G8976-C212