Vrs Menu Commands - Ricoh G413 Supplemental Operating Instructions

10. Engine Load Window will display and
disappear when successfully loaded.

VRS Menu Commands

The VRS menu consists of the following commands:
Preview
Use this command to open a sample image, so that you can test image property settings. For
more information, see the section Previewing Images on page 37.
Profile
Use this command to select a profile, which consists of user-defined settings for image
processing. For more information about profiles, see the section Using the Profiles Tab on
page 31.
Mode
Use this command to select an operating mode, which determines the conditions under
which the VRS user interface opens during a scanning session. For more information, see the
section Selecting a Mode on page 20.
Configure
Use this command to open the VRS Administration Utility dialog box, which is used to
define exception condition parameters. For more information, see the section Defining
Exception Conditions on page 14.
Reset
Use this command if you are instructed by authorized technical support personnel to reset
the configuration for the Adrenaline Hardware Accelerator. For more information, see the
section Resetting VRS on page 38.
Kofax Image Products
VRS Getting Started Guide
13