Copying
Copying
Making a copy
1
Load an original document into the ADF tray or on the scanner glass.
Note: To avoid a cropped image, make sure that the original document and the output have the same
paper size.
2
From the control panel, specify the number of copies.
If necessary, adjust the other settings.
3
Copy the document.
Note: To make a quick copy, from the control panel, press
Copying photos
1
Place a photo on the scanner glass.
2
From the control panel, navigate to:
Copy > Settings > Content > Content Type > Photo
3
From the Content Source menu, select the setting that best matches the original photo.
4
Copy the document.
Copying on letterhead
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Copy > Copy From > select the size of the original document.
3
Touch Copy To, and then select the paper source that contains the letterhead.
If you loaded the letterhead into the multipurpose feeder, then navigate to:
Copy To > Multipurpose Feeder > select a paper size > Letterhead
4
Copy the document.
Copying on both sides of the paper
1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
Copy > Settings > Paper Setup
For non-touch-screen printer models, press
.
to navigate through the settings.
39