Lexmark MB2442adwe User Manual page 100

Understanding the printer menus
Menu item
Auto Color Detect
Color Sensitivity
1–9 (5*)
Area Sensitivity
1–9 (5*)
E‑mail Bit Depth
1 bit*
8 bit
JPEG Quality
Best for content*
5–95
Contrast
Best for content*
0
1
2
3
4
5
Background Removal
Background Detection
Content‑based*
Fixed
Level
‑4 to 4 (0*)
Mirror Image
Off*
On
Negative Image
Off*
On
Shadow Detail
‑4 to 4 (0*)
Scan Edge to Edge
Off*
On
Sharpness
1–5 (3*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the amount of color that the printer detects from the original document.
Note: This menu item appears only when Color is set to Auto.
Set the quality of a JPEG‑format scanned image.
Notes:
•
5 reduces the file size, but lessens the image quality.
•
95 provides the best image quality, but produces a large file size.
Specify the contrast of the output.
Adjust the amount of background visible on a scanned image.
Note: If you want to remove the background color from the original
document, then set Background Detection to Content-based. If you want to
remove image noise from a photo, then set Background Detection to Fixed.
Create a mirror image of the original document.
Create a negative image of the original document.
Adjust the amount of shadow detail visible on a scanned image.
Allow edge‑to‑edge scanning of the original document.
Adjust the sharpness of a scanned image.
100