Table of Contents
Advertisement
Messages
Remove Paper
from Staple Tray
Remove Paper
Mailbox Tray #
Remove Paper
Shift Tray
Replace
Maintenance Kit
Replace
PCU
Remove Paper
Standard Tray
Error & Status Messages on the Operation Panel
Description
There is paper in the stack
unit of SR720 (finisher).
The CS370 (4-bin Mailbox)
tray # is full.
The shift tray of SR720 (fin-
isher) is full.
It is time to replace parts in-
cluded in Maintenance Kit.
It is time to replace Photo
Conductor Unit.
The standard output tray is
full.
Comments
Remove paper from the
stack unit of SR720 (finish-
er).
Important
Remove the paper from
the output tray before it
becomes full. If you
leave paper in the out-
put tray, it can cause a
paper misfeed.
Remove paper from the
CS370 (4-bin Mailbox) tray.
Important
Remove the paper from
output tray before it be-
comes full. If you leave
paper in the output tray,
it can cause a paper mis-
feed.
Remove paper from the
SR720 (finisher) tray.
Important
Remove the paper from
the output tray before it
becomes full. If you
leave paper in the out-
put tray, it can cause a
paper misfeed.
Replace Maintenance Kit.
After replacing the kit,
clean the registration roll-
ers.
Replace Photo Conductor
Unit.
Remove paper from the
output tray.
Important
Remove the paper from
output tray before it be-
comes full. If you leave
paper in the output tray,
it can cause a paper mis-
feed.
5
55
Advertisement
Table of Contents
