Table of Contents
Advertisement
Troubleshooting
Messages
Energy Saver 2
Error 1
Error 2
Error 3
5
Error 4
Error 5
Error 6
Error 7
Error 30711
Error 30721
52
Description
In Energy Save Mode level
2.
An error with the optional
RAM has occurred.
An error with the parallel
interface board has oc-
curred.
An error with the NV-RAM
has occurred.
An error with the DIMM
has occurred.
An error with the HDD has
occurred.
An error with the Resident
font ROM has occurred.
An error with the ASIC has
occurred.
AD370 (duplex unit) can-
not be used.
PS420 (paper feed unit)
cannot be used.
Comments
Press the operation key or
send a job from the com-
puter to turn the power on.
Turn the printer power off
and on. If the message ap-
pears again, contact your
sales or service representa-
tive.
Turn the printer power off
and on. If the message ap-
pears again, contact your
sales or service representa-
tive.
Turn the printer power off
and on. If the message ap-
pears again, contact your
sales or service representa-
tive.
Turn the printer power off
and on. If the message ap-
pears again, contact your
sales or service representa-
tive.
Install the HDD again. If
the message appears again,
contact your sales or ser-
vice representative.
Turn the printer power off
and on. If the message ap-
pears again, contact your
sales or service representa-
tive.
Turn the printer power off
and on. If the message ap-
pears again, contact your
sales or service representa-
tive.
Another tray is used to
print. Contact your sales or
service representative.
Another tray is used to
print. Contact your sales or
service representative.
Advertisement
Table of Contents
