Table of Contents
Advertisement
Paper and Other Media
B
Lift the paper guide lever.
Important
If the paper guides do not
4
match the paper size, a skew
image or a paper misfeed might
occur.
Note
Swing out the extender to sup-
port paper sizes longer than A4
short-edge feed (Metric version)
1
or 8
(Inch version).
C
Load the paper and adjust the pa-
per guides to the sides of the pa-
per.
Important
Confirm the print side of the
OHP
OHP transparencies can be
printed on only the specific
side.
46
/
"
11" short-edge feed
2
transparencies.
Note
Do not stack paper over the lim-
it mark. Otherwise a skew im-
age or a paper misfeed might
occur.
When you set custom size or
thick paper on the bypass tray,
do not stack paper above the
lower limit mark of the bypass
tray.
ZAEY210E
Shuffle the paper before setting
in the tray.
Load the paper face down onto
the tray.
D
Push down the paper guide lever.
Note
If the paper guide lever is not
pushed down, paper misfeed
might occur.
E
Configure the paper size for the
loaded paper size.
Important
The paper size specified with
ZAEY220E
the printer driver overrides the
one specified here.
Reference
Some
For more information on speci-
fying the bypass tray, see the
printer driver help.
For more information on speci-
fying custom paper, see P.48
"Specifying the Custom Paper Size
for the Bypass Tray".
ZAEY250E
Advertisement
Table of Contents
