Table of Contents
Advertisement
Troubleshooting
K
Push the unit into the printer unit
it clicks into place.
L
Remove the red sheet from the
photo conductor unit and remove
the two pieces of tape.
5
M
Close the right cover of the print-
er.
Note
If the right side cover of the
printer cannot be closed, it
means that the photo conductor
unit has not been properly in-
stalled. Slide the photo conduc-
tor unit out and push it into the
printer again until it clicks into
place.
82
N
Close the front cover.
ZAEM370E
O
If the duplex unit is installed,
close the duplex unit .
P
Turn on the printer.
ZAEM410E
After 1 minute, the display ap-
pears.
ZAEM310E
ZAEM380E
ZAEP270E
Advertisement
Table of Contents
