Exhaust Diverter Installation; Pto Mount Plate Component Installation - Cub Cadet 59A30045150 Operator's Manual

2-3 Exhaust Diverter Installation

For LZ & SZ Models Only With Round Exhaust Pipe -
Attach (1) exhaust diverter P#(B0693) to the muffler
exhaust pipe. Secure the diverter using (1) exhaust
clamp kit P#(X1064). Do not tighten the exhaust clamp
until the PTO mount plate components have been
installed and the exhaust diverter has been positioned
correctly. Refer to Figure 2-3a for positioning.

2-4 PTO Mount Plate Component Installation

Secure the right PTO mount plate P#(B0859) & exhaust diverter P#(C0091) to the right frame bracket using (2) 3/8"-
16 x 1" HHCS P#(K1191) and (2) 3/8"-16 nylon flange lock nuts P#(K2038). Secure the left PTO mount assembly
P#(A1991) to the right frame bracket using (2) 3/8"-16 x 1" HHCS P#(K1191) and (2) 3/8"-16 nylon flange lock nuts
P#(K2038). Do not tighten the hardware completely until the all the components have been installed. Secure the
exhaust diverter P#(C0091) to the left PTO mount assembly using (1) 1/4" self tapping screw P#(K0353). Refer to
Figure 2-4a.
Figure 2-4a
(4) 3/8"-16
Nylon Flange
Lock Nuts
Exhaust Diverter
(LX & SX Models Only)
(4) 3/8"-16 x 1"
HHCS
Figure 2-3a
Muffler
Exhaust Pipe
7
Exhaust
Clamp Kit
Right Frame
Bracket
Right PTO
Mount Plate
Left PTO
Mount
Assembly
1/4" Self Tapping Screw
Exhaust
Diverter