Using The Shutter Release Button To Set A Setting In Adj. Mode (Adj Shutter) - Ricoh GR Digital II User Manual

Using the Shutter Release Button to
Set a Setting in ADJ. Mode (ADJ
Shutter)
In ADJ. mode (GP.64), you usually press the MENU/OK button or
the ADJ. lever to set a setting.
When [ADJ Shutter] is set to [On], you can also set a setting by half-
pressing the shutter release button.
Available Settings
On
Off *Default setting
To change the shutter release button setting, follow the steps
below.
1
Display the setup menu.
• For the operating procedure, see P.156.
2
Press the " button to select [ADJ Shutter] and press
the $ button.
3
Press the !" buttons to select
[On].
4
Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
Description
Press the ADJ. lever, the MENU/OK button, or half-press the
shutter release button to set the setting.
Press the ADJ. lever or the MENU/OK button to set the setting.
5
167