Setting A Function To The Adj. Button (Adj Btn.set.) - Ricoh Caplio R2 User Manual

Setting a Function to the ADJ. Button
(ADJ BTN.SET.)
Each time the ADJ. button is pressed, the camera displays the setting screen
in the order of exposure, white balance, and ISO sensitivity.
By using the [ADJ BTN.SET.] option, you can set a function to be activated
when the ADJ. button is pressed the fourth time.
Possible Settings
OFF *Setting upon purchase
QUALITY (PIC/QUALITY)
AF/MF (FOCUS)
SHARP (SHARPNESS)
PHOTOMETRY
To assign a function to the ADJ. button, follow the steps below.
1.
Display the setup menu.
For detailed operation, see P.107.
2.
Press the !" button to select
[ADJ BTN.SET.] and press the O
or $ button.
3.
Press the !" buttons to select
the desired setting.
4.
Press the O or # button.
5.
If you pressed the # button in
step 4, press also the M button.
This setting will be used until you change it.
Note
If a function is set with [ADJ BTN.SET], the AF target shift function (P.83) available from the
ADJ. button at Macro shooting is activated when the ADJ. button is pressed the fifth time.
Reference
For how to use the ADJ. button, see P.57.
(Refer to)
P.60
P.62
P.66
P.65
111