Assigning Functions To The Adj./Ok Button (Adj Btn. Set.) - Ricoh R8 User Manual

Assigning Functions to the ADJ./OK
Button (ADJ Btn. Set.)
When functions are assigned to the ADJ./OK button, you can
display various shooting setting screens with fewer button
operations and without displaying the Shooting menu.
You can use [ADJ Btn. Set.1] to [ADJ Btn. Set.4] to assign camera
functions that can be activated by pressing the ADJ./OK button.
For information on how to use the ADJ. mode, see P.64.
Available Settings
Off
Expo. Cmp
Wht. Bal.
ISO
Quality (Pic Quality/Size)
Focus
Sharp
Expo. Met.
Cont Mode
Auto BKT
To assign a function to [ADJ Btn. Set.1] to [ADJ Btn. Set.4], follow
the steps below.
1
Display the Setup menu.
• For the operating procedure, see P.141.
2
Press the ADJ./OK button " to select [ADJ Btn. Set.1],
[ADJ Btn. Set.2], [ADJ Btn. Set.3], or [ADJ Btn. Set.4],
and then press the button $.
3
Press the button !" to select
the desired setting.
4
Press the ADJ./OK button.
*Default setting for [ADJ Btn. Set.4]
*Default setting for [ADJ Btn. Set.1]
*Default setting for [ADJ Btn. Set.2]
*Default setting for [ADJ Btn. Set.3]
Refer to
-
P.92
P.94
P.97
P.72
P.74
P.78
P.77
P.79
5
P.84
157